6 Steps to Install the Toilet

The installation of the toilet is usually the focus of the bathroom space decoration because it is directly related to our future use. We need to install the toilet according to the following steps to ensure the performance and service life of the toilet.

First of all, when we are installing the toilet, we need to have an overall view of the sewage pipe first to check whether there is any blockage of debris such as mud and sand in the pipe. At the same time, we need to carefully check whether the ground around the location where the bathroom toilet is installed is level. If the floor is not level, we need to level the ground before installation.

I believe everyone knows that the wc toilet has a sewage center. Before installing the toilet, we must determine the center of its sewage pipe. We can put the toilet upside down, and then determine the center on the toilet's sewage outlet. At the same time, draw a cross centerline at its center, and the cross center line should extend to the bottom of the toilet and the surrounding feet.

Through the above two steps, we can fix the bathroom toilet. When fixing the toilet, first align the cross line of the toilet with the drain outlet on the ground. When we ensure that the toilet is installed horizontally, firmly press the sealing ring, and finally we can install the foot screw and the decorative cap.

Next, we have to install the corresponding sealing ring on the sewage outlet, such as coating a circle of glass glue (putty) or cement mortar around, and the ratio of cement to sand is 1:3.

The last step is to install the accessories of the water tank. We can put water for 3 to 5 minutes to flush the pipeline. After ensuring that the water pipe is clean, you can install the angle valve and the connecting hose, and then connect the hose to the installed water tank fittings, and press the water source at the same time.

In order to ensure a successful installation, the toilet needs to be inspected. It is necessary to check whether the inlet valve and seal are normal, whether the installation position of the drain valve is flexible, and whether there is jamming and leakage, and so on.

Before we install the toilet, we need to make various measurements to ensure that the toilet is installed correctly. If you want to know more about the toilet after reading the above, you can get a comprehensive solution by contacting us. At the same time, the toilets we produce are of various types and excellent quality, which can meet the diverse needs of customers.

As a professional manufacturer of toilets and accessories, we have won unanimous praise from many customers with our excellent products and considerate service. We have a professional production team and a complete management system to strictly control the quality of our products. We can also provide thoughtful one-stop service and effective solution technology according to the actual needs of customers. If you want to buy our high-quality toilet, please contact us immediately!