How to Choose the Right Toilet According to Your Needs?
Choosing the right toilet for your home can play an important role in daily comfort. By understanding the different types of toilets available below and tips on choosing the best toilet, you can maximize the value of your bathroom.
Check the Dimensions
Every bathroom is arranged differently, and it's important to know that the toilet you choose will be a proper fit for the space you have available.
(1) Measure the Rough-in Size
This is the distance from the wall behind the toilet to the center of the drainpipe or to the bolts that attach the toilet to your floor. For the best results, measure this while your old toilet is still in place. Typically, this measurement will be 12 inches, but it is possible for it to be 10 inches or 14 inches, as well.
(2) Use the Measurements to Choose a Toilet
The key is to make sure the toilet you select is the same size or smaller at the base than the old toilet. This will ensure a smooth and simple installation process.
Consider Types of Toilets
(1) One-Piece Toilets
One-piece toilet with slope-shaped back and tank. Generally, they are easier to clean and can provide an incredibly sleek look.
(2) Two-Piece Toilets
Most toilets showcase a two-piece design with a tank that is bolted to the bowl of the toilet. Two-piece toilets tend to be a more cost-effective option than one-piece toilets, but they can also be more difficult to clean.
(3) Wall Hung Toilets
These toilets don't mount to the floor like a standard toilet. Instead, they are attached to the wall itself, leaving the space below free and clear. Not only does this make it much easier to keep the floors mopped and clean, but it can also be a space-saving solution in a smaller bathroom. Because the plumbing is installed differently for these toilets, it's ideal to choose this option during the initial building of the space or during an extensive renovation.
Check Out Toilet Features
No matter which type of toilet you choose, your new toilet is bound to offer additional features.
(1) Toilet Bowl Height
Most toilets feature a standard bowl height of 14 to 15 inches above the floor. If you're on the taller side, you can get a taller bowl height of 17 to 19 inches.
(2) Antimicrobial Coatings
All surfaces in the home are a breeding ground for bacteria, but choosing an antimicrobial coated toilet seat is a great solution in the bathroom. Not only does it provide the toilet with a smoother finish overall, but it is also a great way to help keep your bathroom clean between scrubbings.
(3) Heated Seats
Make your everyday bathroom experience a little cozier by opting for a toilet featuring heated seats. These low-voltage warmers utilize controls that allow you to adjust the temperature of the toilet seat at different times of the year.
Consider Different Types of Flush Systems
The look of the toilet isn't the only important factor; how the toilet flushes is an important consideration, as well. There are a few different flush options featured throughout the extensive toilet collection, including:
(1) Pressure-Assist Toilet
Most popular in commercial bathrooms, pressure-assist toilets use added pressure to help ensure a powerful flush and minimize the occurrence of clogs. Pressure assist toilets also keep the toilet bowl cleaner with every flush.
(2) Dual Flush Toilets
Control just how much or how little water you use to flush your toilet by choosing one with a dual flush toilet. One button provides a low-flow half flush for fluid waste, while the other provides a higher-flow flush for solid waste. Choosing dual flush toilets for your bathroom could save you as much as 67% of your water usage annually, but they do often cost a little bit more upfront.
(3) Gravity Flush System
The vast majority of toilets feature a gravity flow system. With this type of flush, the weight of the water helps to generate the flush. They are less expensive upfront and cost less to repair down the road.
(4) Low-Flow Toilets
Conserving water is a top priority in many homes because it helps to lower environmental impact, as well as your utility bill. Low-flow toilets use as little water as possible for each flush, which can be as low as 0.8 gallons per flush. These savings really add up over time, especially in a home with a lot of people.
If you want to know more about the toilet after reading the above, you can get a comprehensive solution by contacting us.
As a professional toilet and accessories manufacturer, we produce a variety of high-quality toilets (such as wall-hung toilets and one-piece toilets). We have an experienced manufacturing team and a strict quality inspection team, which can control the quality of the products in all aspects. At the same time, we can also provide thoughtful one-stop service and effective solutions according to customer needs. If you are interested in our toilets, please contact us immediately!