Reasons and Solutions for Toilet Odor
The toilet has brought a lot of convenience to our life, especially for families with elderly and children, they often choose to install the toilet to facilitate the use of the elderly and children, but the toilet needs to be cleaned regularly after a period of use, otherwise, it is easy to produce odor.
When there is a peculiar smell in the toilet, we need to find out the cause in time so that we can carry out the targeted treatment. Common causes and solutions for toilet odors are listed below.
The toilet displacement causes the water to be too slow
The displacement of the toilet caused the water to flow too slowly, thus producing an odor. When many families are renovating, considering the layout of the bathroom, the position of the toilet may be changed when installing the toilet, so that the toilet is not installed directly against the drain, which can easily lead to too slow draining, thus producing an unpleasant smell.
Faced with this problem, the most fundamental solution is to move the toilet to the position of the drain, but if it is reinstalled, it is time-consuming and labor-intensive, and the gains outweigh the losses. So if this happens, the most important thing is to be careful not to throw toilet paper in the toilet. Usually, the toilet needs to be cleaned frequently, so that the toilet should not be blocked.
Insufficient seal at the joint of the sewer pipe
If the connection of the sewer pipe is not tight, it is easy to cause the toilet to have an odor. When installing, we need to pay special attention to the connection between the chassis of the toilet and the sewer pipe. If the connection is not tight, it is easy to cause odor in subsequent use.
The solution is very simple. We need to use glass glue to fill the gap where the toilet is connected to the ground with glass glue. Usually, glass glue can only be used for 2-3 years. If this period is reached, then we may need to re-gluing to ensure the use effect of glass glue.
Toilet water seal not up to standard
A water seal is designed inside the toilet, and its main function is to prevent the odor from escaping upward, and the height of the water determines the effect of the water seal. Under normal circumstances, the height of the water seal of the toilet is 50mm. If the height of the water seal does not meet the standard, it will also have a certain impact on the deodorization, resulting in odor.
The solution to this problem needs to be done from the root. When purchasing a toilet, be sure to check the height of the water seal, but if the height of the water seal is too high, the problem of splashing water will occur. Therefore, the 55mm height of the water seal generally needs to be selected when purchasing a toilet.
Poor quality of toilet glaze
If the glaze on the ceramic material of the toilet itself is not good, it is very likely to hide dirt and dirt, and it is difficult to completely clean up when cleaning. Using such a toilet, it is easy to produce a peculiar smell after a long time.
To cure this problem, the best way is to replace the toilet with better quality. If it cannot be replaced temporarily, it is best to speed up the frequency of cleaning the toilet to ensure that the stains will not accumulate and penetrate into the toilet.
The reason for the odor of the toilet is often improper operation during installation or irregular cleaning. If you feel that the above method is not very effective for you after reading the above, you can also send your needs to us, we will promptly give you a satisfactory answer.
MWD is an experienced toilet and accessories manufacturer, we have become a leader in the industry with leading R&D technology and excellent manufacturing process. Our products are sold all over the world and are well received and trusted by many customers. Meeting the needs of our customers has always been our aim. If you want to buy our toilet, please contact us immediately!